Holding Magnets

Not unlike when using a pot magnet, the NdFeB cube is embedded in a steel U-profile. The profile further strengthens the adhesive force of the magnet. For this reason, the holding magnet is considerably stronger than a tubular magnet of the same size. Holding magnets feature one or more holes, so that they can be screwed on.

Not unlike when using a pot magnet, the NdFeB cube is embedded in a steel U-profile. The profile further strengthens the adhesive force of the magnet. For this reason, the holding magnet is... read more »
Close window
Holding Magnets

Not unlike when using a pot magnet, the NdFeB cube is embedded in a steel U-profile. The profile further strengthens the adhesive force of the magnet. For this reason, the holding magnet is considerably stronger than a tubular magnet of the same size. Holding magnets feature one or more holes, so that they can be screwed on.

Close filters
 
  •  
from to
  •  
  •  
  •  
  •  
  •  
No results were found for the filter!
- 20x13.5x5mm - Neodym Holding Magnet Block - NiCuNi
height (Pot) 5mm, hole with countersunk 90° for M3 screw 10g, max. working temp. 80°C, magnetised through 5mm, ca. 7.4kg pull
From €1.79 *
Quantity Unit price
To 4 €1.79*  
From 5 €1.66*  
From 20 €1.52*  
From 100 €1.25*  
- 40x13.5x5mm - Neodym Holding Magnet Block - NiCuNi
height (Pot) 5mm, 2 holes with countersunk 90° for M3 screw 20g, max. working temp. 80°C, magnetised through 5mm, ca. 14.4kg pull
From €3.49 *
Quantity Unit price
To 2 €3.49*  
From 3 €3.32*  
From 10 €3.14*  
From 50 €2.62*  
- 80x13.5x5mm - Neodym Holding Magnet Block - NiCuNi
height (Pot) 5mm, 2 holes with countersunk 90° for M3 screw 40g, max. working temp. 80°C, magnetised through 5mm, ca. 32kg pull
From €6.98 *
Quantity Unit price
To 2 €6.98*  
From 3 €6.28*  
From 10 €5.24*  
From 50 €4.54*  
Viewed