Close filters
from to
  •  
  •  
  •  
  •  
  •  
from to

Channel Magnets

Not unlike when using a pot magnet, the NdFeB cube is embedded in a steel U-profile. The profile further strengthens the adhesive force of the magnet. For this reason, the holding magnet is considerably stronger than a tubular magnet of the same size. Holding magnets feature one or more holes, so that they can be screwed on.

Not unlike when using a pot magnet, the NdFeB cube is embedded in a steel U-profile. The profile further strengthens the adhesive force of the magnet. For this reason, the holding magnet is... read more »
Close window
Channel Magnets

Not unlike when using a pot magnet, the NdFeB cube is embedded in a steel U-profile. The profile further strengthens the adhesive force of the magnet. For this reason, the holding magnet is considerably stronger than a tubular magnet of the same size. Holding magnets feature one or more holes, so that they can be screwed on.

Filter
No results were found for the filter!
20x13,5x5mm - N35 Flachgreifermagnet Quader - NiCuNi 20x13.5x5mm - Neodym Channel Magnet Block - NiCuNi
height (Pot) 5mm, hole with countersunk 90° for M3 screw 10g, max. working temp. 80°C, magnetised through 5mm, ca. 7.4kg pull
From €2.46 *
Prices
From 2
€2.46 *
From 5
€2.27 *
From 20
€2.09 *
From 100
€1.71 *
40x13,5x5mm - N35 Flachgreifermagnet Quader - NiCuNi 40x13.5x5mm - Neodym Channel Magnet Block - NiCuNi
height (Pot) 5mm, 2 holes with countersunk 90° for M3 screw 20g, max. working temp. 80°C, magnetised through 5mm, ca. 14.4kg pull
From €5.01 *
Prices
From 1
€5.01 *
From 3
€4.77 *
From 10
€4.52 *
From 50
€3.76 *
80x13,5x5mm - N35 Flachgreifermagnet Quader - NiCuNi 80x13.5x5mm - Neodym Channel Magnet Block - NiCuNi
height (Pot) 5mm, 2 holes with countersunk 90° for M3 screw 40g, max. working temp. 80°C, magnetised through 5mm, ca. 32kg pull
From €10.48 *
Prices
From 1
€10.48 *
From 3
€9.42 *
From 10
€7.85 *
From 50
€6.83 *
Viewed